Time-saving Arlington fittings, boxes, weatherproof covers and connectors — stocked in Canada, priced in CAD, shipped fast across Ontario & Quebec.
Shop by category
What is Arlington Industries?
Arlington Industries is an American manufacturer of electrical fittings, boxes, covers and connectors, known for products engineered to save installation time on the job. Founded as a family-run business, Arlington designs tool-less, push-on and snap-in fittings that let electricians make connections faster and more reliably than traditional set-screw or threaded hardware.
The Arlington catalogue spans flex/AC/MC and conduit connectors, bushings and locknuts, straps and supports, grounding and bonding, service-entrance and mast fittings, liquid-tight connectors, cord grips, floor boxes, fan and fixture boxes, specialty and siding boxes, low-voltage and cable management, recessed TV and media boxes, weatherproof in-use covers, and outdoor power posts.
Many of Arlington's signature lines are trademarked, including SNAP2IT®, SNAP-TITE®, IN BOX™, Gard-N-Post®, TV BOX®, CableWay®, SCOOP®, LOOP®, ONE-BOX® and AnyBody®. These names refer to specific Arlington product families rather than generic categories.
Is Maple an authorized Arlington dealer in Canada?
Yes. Maple Electric Supply is an authorized Canadian distributor of Arlington Industries products. We stock 1,700+ Arlington SKUs in Canada, priced in CAD — so there are no surprise cross-border charges, brokerage fees or import duty for Canadian buyers ordering through us.
We carry Arlington inventory with stock in Ontario and Quebec, fast shipping across both provinces, and will-call pickup for contractors who need parts the same day. For project volumes, send us your parts list and our counter team will help you source and price the right Arlington items.
What makes Arlington fittings different?
Arlington's reputation is built on labour savings. Many of its connectors and fittings install tool-lessly — you push or snap them into place instead of threading set screws or wrestling with locknuts. SNAP2IT connectors, for example, snap onto MC, AC and flexible cable and into knockouts by hand, which can meaningfully cut the time per device on a large job.
That time-saving design philosophy runs across the line — recessed IN BOX covers, snap-in fan and fixture boxes, and Gard-N-Post outdoor power posts are all built to reduce steps on site. Maple is a supply-only distributor: we stock the parts, but installation, layout and code compliance should always be handled by a licensed electrician working to the Canadian Electrical Code (CEC).
| Family | What it is | Arlington line | Shop |
|---|---|---|---|
| Flex, AC & MC connectors | Push-on cable connectors for MC/AC/flex | SNAP2IT®, SNAP-TITE® | Shop |
| Weatherproof in-use covers | Recessed while-in-use outdoor/indoor covers | IN BOX™ | Shop |
| TV & media boxes | Recessed power + low-voltage media boxes | TV BOX® | Shop |
| Outdoor posts & GFCI supports | Outdoor power & GFCI support posts | Gard-N-Post® | Shop |
| Low-voltage & cable management | Cable-entry plates & routing | CableWay®, SCOOP®, LOOP® | Shop |
| Fan & fixture boxes | Snap-in fan, fixture & ceiling boxes | ONE-BOX®, AnyBody® | Shop |
Are Arlington products CSA/cUL approved for Canada?
Many Arlington products carry certification marks recognized in Canada (such as CSA, cUL or ETL/cETL), but the exact listing varies by product and catalogue number. Always check the certification marks shown on the individual product page and on the part itself before specifying or installing.
For any installation, confirm acceptability with your local electrical inspector and ensure the product is approved for your application and location under the Canadian Electrical Code. If you are unsure which marks make a product acceptable in Canada, see our CSA / cUL / ETL Canadian approval guide.
Sourcing Arlington for a project? Send us your parts list.
Request a QuoteFAQ
Is Maple an authorized Arlington dealer in Canada?
Yes. Maple Electric Supply is an authorized Canadian distributor of Arlington Industries, stocking 1,700+ Arlington SKUs in Canada with fast Ontario and Quebec shipping and will-call pickup for contractors.
Are Arlington prices in CAD?
Yes. All Arlington products on our store are priced in Canadian dollars (CAD). You order domestically through Maple, so there are no exchange-rate surprises at checkout.
Will I pay cross-border duty or extra shipping?
No. Because we stock Arlington in Canada and ship from within the country, Canadian buyers avoid cross-border brokerage, import duty and slow US shipping. You order from a Canadian distributor in CAD.
Are Arlington products CEC / CSA approved?
Many Arlington products carry CSA, cUL or ETL/cETL marks recognized in Canada, but it varies by item. Check the marks on the product page and the part, and confirm acceptability with your local inspector under the Canadian Electrical Code.
What is SNAP2IT and why use it?
SNAP2IT is Arlington's line of push-on connectors for MC, AC and flexible cable. They snap onto the cable and into knockouts by hand, with no set screws — which can cut installation time per connection on larger jobs.
How is an IN BOX different from a standard weatherproof cover?
Arlington's IN BOX is a recessed while-in-use enclosure: the device and plug sit inside a recessed box so the weatherproof cover closes flush to the wall. A standard surface in-use cover bubbles out from the wall instead of recessing.
What are lead times and will-call pickup?
Stocked Arlington items ship fast across Ontario and Quebec, and contractors can use will-call pickup for same-day collection. For larger or special-order quantities, contact our counter team for current lead times.
Can I get a bulk or BOM quote?
Yes. Send us your Arlington parts list or bill of materials and our counter team will help you source, confirm availability and price the order in CAD. Use Request a Quote to start.