LEDFP-72BIF 72" built-in electric fireplace equipped with overheat protection device
Regular price
$1,287.93 CAD
Regular price
Sale
$1,499.00 CAD
Sale price
$1,287.93 CAD
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
Description:
- Vent located at the front
- Installation hardware kits are included
- With black glossy high end tempered glass panel
- Multiple 10 colours LED lights for ember bed decoration
- With log, crystal (both big & small) embers for flame media decoration
- Multiple 3 colours LED lights for flame decoration (orange / blue / mixed orange&blue)
Specifications:
| Wattage | High — 1500W / Low — 750W (2 levels of heating) |
| Voltage | 110-120V AC |
| Material | Log set / Small & Large Crystals |
| Installation | Built-in |
| Timer | 0.5-8 hours |
| Control Mode | Touch Panel / Remote Control |
| Flame Colours | Multiple 3 colours LED lights for flame |
| Flame Brightness | 5 levels |
| Overheat Protection | Yes |
| Heating Area | 400 ft² |
| Warranty | 1 Year |
Installation:
- Select a dry wall to open a hole for fireplace box
- Place the fireplace to a soft clean place.
Use the screw driver to take off the two screws in both sides - Have two people to pull the trim up, then take them out of the fireplace box
- Using the screw driver to take off the 8 screws, have two people to take out the glass panel.
Move it to a clean soft place to avoid the scratching - Have two people to lift the fireplace box and put it into the opened hole.
Fix the four wall screws in each side of the fireplace box - Place the decorative crystals and drift log pieces on the designed slot and even with them
- After placing the decorative crystals and drift log pieces on the designed slot, even with them from side to side.
Move and screw back the glass panel and metal trim