The Intermatic FF60MC is a commercial spring-wound countdown timer with a 60 minute maximum and no hold position, so every cycle ends with the load switched off. It replaces a single-gang wall switch, runs without power or a neutral, and suits fans, lights, motors and heaters in spaces where nobody should be able to leave equipment running. A brushed-metal-look plastic plate is included.
Why facility managers pick it
- No hold position: the load always times out, even in shared or public spaces.
- Up to 60 minutes of run time per turn of the dial.
- Spring-wound, no neutral or power needed; SPST contacts.
- Rated 125-277 V AC for resistive, motor and lamp loads.
- cCSAus certified; 1-year limited warranty.
Specifications
| Spec |
Detail |
| Brand |
Intermatic |
| Model |
FF60MC |
| Type |
Spring-wound countdown timer, commercial, without hold |
| Timing range |
Up to 60 minutes |
| Switch |
SPST |
| Voltage |
125-277 V AC, 50/60 Hz |
| Resistive / heater rating |
20 A 2500 W at 125 V; 10 A 2500 W at 250 V; 10 A 2770 W at 277 V |
| Motor rating |
1 HP at 125 V; 2 HP at 250 V |
| Tungsten (incandescent) |
7 A, 875 W at 125 V |
| Neutral |
Not required |
| Certification |
cCSAus |
Pro tip from the counter
Check the load type against the right rating line. The timer handles 20 A of resistive heat at 125 V, but its tungsten incandescent rating is only 875 W at 125 V, so a bank of old halogen or incandescent floods can exceed it long before a heater would.
Best for: public and staff washroom fans, commercial garage heaters, shared laundry and utility rooms, energy-saving retrofits
Ships across Canada from Vaughan, ON. Trade pricing is available through a quote or at (905) 553-7171.