Ouellet ODSA02000BL is a surface-mounted ceiling fan heater that pushes trapped warm air down from the ceiling for faster comfort in larger rooms. It is a strong choice for garages, stairwells, drop ceilings, and commercial spaces that need immediate air circulation plus reliable electric heat.
TL;DR: Who is this for
This heater is for electricians, facility teams, and contractors installing ceiling-mounted heat where warm air collects overhead and needs to be driven back into the occupied zone.
It is a fit when you want 2000W on a 240V 1-phase circuit, surface-mount installation, and straightforward controls via a remote thermostat or relay.
Institutional Fit
- Good for apartment buildings, commercial buildings, stairwells, garages, and drop-ceiling environments
- Helps reduce “heat stratification” by blowing warm air accumulation near ceilings downward
- Built for daily use with a lifetime-lubricated ball bearing motor and durable heating elements
- Safety-focused with high-limit temperature control and automatic reset
Technical Specifications
| Brand / series |
Ouellet, Series ODS |
| Model |
ODSA02000BL (Surface mount) |
| UPC |
00625262243646 |
| Rated output |
2000W |
| Supply voltage |
240V |
| Phase |
1-phase |
| Airflow |
310 CFM |
| Temperature rise (at rated condition) |
11°C (20°F) |
| Motor |
1/50 HP, 1550 RPM |
| Color |
White (standard). Almond also standard on the series. Optional colors available by request. |
| Finish |
Epoxy/polyester powder paint |
| Construction |
Outlet grille made of flat ribbon wire. High-limit temperature control with automatic reset. |
| Fan |
Totally enclosed, lifetime-lubricated ball bearing motor. Fan delay purges residual heat. |
| Heating elements |
Three stainless steel tubular heating elements with aluminum fins |
| Weight |
25 lb (11.4 kg) |
| Warranty |
3-year warranty against defects. 10-year warranty on heating elements. |
Regulatory Compliance
- Confirm approval markings and nameplate ratings on the unit before installation
- Verify supply voltage matches the heater nameplate rating before energizing
- All wiring must follow national and local electrical codes
Durability & Lifecycle
- Ball bearing motor is designed for long service life with lifetime lubrication
- Stainless steel tubular elements support consistent heat output over time
- Fan delay function helps purge residual heat after a heating cycle, reducing thermal stress
Procurement notes
- Controls: Any remote thermostat or relay must be connected to the heater control terminal block
- Control circuit: 240/208V control circuit is standard on the series, with other control options available depending on configuration
- Install planning: Recommended installation height is 8 ft to 12 ft (2.4 m to 3.6 m)
- Vibration note: Consider installing on an outside ceiling to reduce vibration transfer to adjacent rooms
Installation & Safety
- Installation should be performed by a qualified person where required by law
- Mount solidly. Unit weight can be up to 25 lb
- Maintain clearances. Keep combustibles at least 36 in (915 mm) from the front of the heater
- Ensure nearby framing, insulation, and finishes can withstand at least 90°C (194°F)
FAQ
What does a ceiling fan heater do?
It recirculates warm air that collects near the ceiling and pushes it downward, improving comfort in taller or larger rooms.
Is this unit surface-mounted?
Yes. ODSA is the surface-mount version of the ODS series.
Does it need a thermostat?
It is typically controlled by a remote thermostat or relay connected to the heater terminal block.
What voltage is this specific SKU?
This model is 240V, 1-phase, 2000W. Always confirm nameplate before wiring.
How high should it be installed?
Recommended height is 8 ft to 12 ft (2.4 m to 3.6 m).
Is there an overheat safety?
Yes. It includes high-limit temperature control with automatic reset.
What spaces is it commonly used in?
Garages, stairwells, drop ceilings, apartment buildings, and commercial buildings.
Where can I get drawings and instructions?
Use the technical documents below.
Downloads
- Product sheet
- Approval drawing
- 3D Drawing
- ODSA Installation guide