Terminating heavy Teck cable at a pump, panel or MCC takes a connector that grounds the armour and keeps water out of the enclosure. The Techspan RTK-200-15 is a 2 in hub aluminum Teck cable connector of the Remke PowR-Teck design, sized for cable 2.225 to 2.350 in over the jacket. The one-piece body installs without disassembly.
Why industrial electricians pick it
- No disassembly: feed the cable, tighten, done.
- Grounding seal lands on the armour to bond it to the enclosure.
- Neoprene bushing gives pull-out resistance and a jacket seal; Viton O-ring seals the hub.
- NEMA 4 and IP65 rated for indoor or outdoor, wet or dry use.
- CSA certified to C22.2 No. 18 (file 28985).
Specifications
| Spec |
Detail |
| Brand |
Techspan (Remke PowR-Teck design) |
| Part number |
RTK-200-15 |
| Hub size |
2 in |
| Range over jacket |
2.225 to 2.350 in |
| Range over armour |
2.115 to 2.270 in |
| Exposed armour length |
1-3/4 in |
| Dimension A / B |
4.05 in / 4.15 in |
| Material |
Aluminum |
| Ratings |
NEMA 4, IP65 |
| Certification |
CSA C22.2 No. 18, file 28985 |
Pro tip from the counter
Strip the Teck jacket back to leave 1-3/4 in of exposed armour for this connector. Too little and the grounding seal ends up on the jacket instead of the armour; too much and bare armour sits outside the neoprene seal where water can reach it.
Best for: large Teck90 feeders, MCC and switchgear entries, water treatment plants, industrial and temporary power
Downloads: PowR-Teck spec sheet (PDF)
Shipped Canada-wide from Vaughan, ON. For project quantities, request trade pricing through a quote or (905) 553-7171.