Adding network, phone or speaker cable to a finished wall without fishing drywall is what surface raceway is for. The Techspan SDPV1250WH6 is a 1-1/4 in by 5/8 in Snap-Duct raceway in off-white, 6 ft long, with adhesive tape on the back so it can go up without drilling. It is made for low-voltage and data cabling, not for power wiring.
Why installers pick it
- Tape-backed base goes up fast on clean, smooth walls.
- Snap-on cover makes it easy to add or change cables later.
- High-impact PVC rated UL 94V-0 and CSA 0.6V-0 for flame.
- Matching Techspan fittings are available: couplings, inside and outside corners, tees, right angles, end caps, a drop-ceiling end and a reducer to the 1/2 in size.
- Made in Canada.
Specifications
| Spec |
Detail |
| Brand |
Techspan (Snap-Duct) |
| Model / SKU |
SDPV1250WH6 |
| Size |
1-1/4 in x 5/8 in |
| Length |
6 ft |
| Colour |
Off-white |
| Mounting |
Adhesive tape backing |
| Material |
High-impact PVC |
| Flame rating |
UL 94V-0 / CSA 0.6V-0 |
| Intended use |
Low-voltage and data cable, 48 V maximum, Category 5 |
| Standard carton |
20 pieces (120 ft) |
Pro tip from the counter
Wipe the wall with isopropyl alcohol and let it dry before pressing the tape down, then hold each length firmly for a few seconds; on fresh paint, textured block or anywhere the cable bundle will pull on the raceway, add a screw or anchor through the base as well as the tape.
Best for: office network drops, home theatre and speaker wiring, security and camera cable, retrofit data runs
Shipped Canada-wide from Vaughan, ON. Contractors can get carton pricing through a quote or at (905) 553-7171.