Fluorescent troffers and strip lights with failing ballasts can go straight to line voltage and skip the ballast replacement. The EiKO 09733 is a 4 ft ballast bypass LED T8 tube in 3500K that draws 17 W on 120-277 V, with a shatter-resistant nano polycarbonate body. It is DLCv4.1 listed and has an 80 CRI, making it a practical T8 LED retrofit for offices, schools and retail.
Why maintenance teams pick it
- Ballast bypass design removes the ballast as a future failure point.
- 120-277 V input covers both common commercial lighting voltages.
- Nano polycarbonate construction resists breakage better than glass tubes.
- 3500K neutral white with 80 CRI for offices, classrooms and stores.
- DLCv4.1 listed for utility incentive programs; G13 medium bi-pin base.
Specifications
| Spec |
Detail |
| Brand |
EiKO |
| Order code |
09733 |
| Type |
4 ft T8 LED, ballast bypass, nano polycarbonate |
| Wattage |
17 W |
| Lumens |
2,100 lm (per EiKO listing) |
| CCT / CRI |
3500K / 80 |
| Voltage |
120-277 V |
| Base |
G13 medium bi-pin |
| Dimming |
Non-dimmable |
| DLC |
DLCv4.1 |
| Rated life |
50,000 hours (per distributor) |
Pro tip from the counter
Before ordering a full case, open one fixture and look at the sockets. Many older fixtures use shunted sockets, and a bypass tube wired single-ended through a shunted pair can short, so have your electrician follow the wiring diagram on the tube label and swap in non-shunted sockets where it calls for them.
Best for: offices and schools, retail stores, warehouses with T8 strips, maintenance teams replacing failed ballasts
Stocked for shipping across Canada from Vaughan, ON. Relamping a building? Request a quote or call (905) 553-7171.